EasyManuals Logo

Omron E3X-DA6 User Manual

Omron E3X-DA6
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Digital Fiber Amplifier
E3X-DA-N
The Ultimate Fiber Amplifier for
Maximum Ease of Use and High
Performance
Be sure to read Safety Precautions
on page 23.
UL991*
* UL certification including UL 991 testing and evaluation Applicable standards: UL 3121-1
Additional application testing and evaluations standards: UL 991 and SEMI S2-0200S
Features
Models with New Connector System
Reduces Wiring, Saves Space, and Makes
Maintenance Easier
In Amplifiers with wire-saving connectors, the power supply is
distributed to 1-conductor slave connectors through a 3-
conductor master connector. This design has three major
advantages.
1. Wiring time is significantly reduced.
2. Relay connectors are unnecessary, so wiring takes up less
space and costs are reduced.
3. Storage and maintenance are simpler because it isn't
necessary to distinguish between master connector and
slave connectors on the Amplifier.
Super Digital Display with Auto Power
Control (APC) Circuit
The passage of time causes the intensity of the Sensor's light-
emitting LED elements to deteriorate, which may make stable
detection impossible.
The E3X-DA-N is the first series of Fiber Sensors to use an
Auto Power Control (APC) circuit. This achieves strict
detection by eliminating fluctuation in the digital value and is
ideal for subtle detection such as stable detection of liquid-
crystal glass.
First in the Industry Patent Pending
Master connector
Simplified Connector Design
Slave connector
Up to 16 Amplifiers can
be connected.
Power
supply pin
Optical
communi-
cations
First in the Industry
Incident level
Time
Threshold
3000
Unstable detection
Incident level
Time
3000
Stable detection
Previous Digital
Fiber Amplifiers
E3X-DA-N Series
Threshold
http://www.ia.omron.com/
1
(c)Copyright OMRON Corporation 2007 All Rights Reserved.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron E3X-DA6 and is the answer not in the manual?

Omron E3X-DA6 Specifications

General IconGeneral
Output TypeNPN / PNP
Operating Temperature-25 to 55 °C
Ambient Humidity35 to 85% RH (no condensation)
Degree of ProtectionIP67
Housing MaterialABS
Protection RatingIP67
TypeFiber Amplifier
Supply Voltage12 to 24 VDC
Response Time1 ms
Weight100 g
Light SourceRed LED
Protection CircuitReverse polarity protection
Insulation Resistance20 MΩ min (at 500 VDC)
Dielectric Strength1, 000 VAC for 1 min
Vibration Resistance10 to 55 Hz, double amplitude 1.5 mm for 2 hours in each of X, Y, Z directions
Shock Resistance1, 000 m/s²
MaterialABS
Output Current100 mA max
Storage Temperature-30 to 70 °C
Current Consumption40 mA max

Related product manuals