E3X-NAUser-Friendly Fiber-Optic Amplifier
Solve Your Basic Sensing Challenges
Easily with the E3X-NA Series
■
Streamlined features provide basic sensing
immediately after plug-in
■
Wire-saving
amplifiers reduce installation
time and minimize space requirements
■
Master/slave connector design affords
connectivity for up to 16 wire-saving
amplifiers
■
Use the LED bar display to quickly confirm
sensor performance
■
Optical communication design prevents
mutual interference for up to 5 amplifiers
■
Green LED models address
mark-detecting
applications
■
High-speed models have a response time
of 50 µs
■
Select a
water-resistant
model (IP66 rating)
using an M8 connector
■
Prewired water-resistant models are available
Ordering Information:
Amplifier Units, Connectors, Accessories and Fiber-Optics
■
Amplifier Units with Cables
Ty pe Part number Control output Appearance
NPN output PNP output
Standard E3X-NA11 E3X-NA41 ON/OFF
High-speed E3X-NA11F E3X-NA41F
Mark-detection E3X-NAG11 E3X-NAG41
Water-resistant E3X-NA11V E3X-NA41V
Downloaded from Elcodis.com electronic components distributor
To Next Page
Need help?
General
