3E3Z Laser Models
Ordering Information
Sensors
Accessories (Order Separately)
Slits (for E3Z-LT@@)
Reflectors (for E3Z-LR@@)
Sensing method Appearance Connection method
Response
time
Sensing distance
Model
NPN output PNP output
Through-beam
Pre-wired (2 m)*1
*1. Pre-wired Models with a 0.5-m cable are also available for these products. When ordering, specify the cable length by adding “0.5M” to the end of the model number
(e.g., E3Z-LT61 0.5M).
M12 Pre-wired Connector Models are also available. When ordering, add “-M1J” to the end of the model number (e.g., E3Z-LT61-M1J). The cable is 0.3 m long.
The following connection forms are also available. Ask your OMRON representative for details.
Pre-wired Models with 1-m or 5-m cables
Pre-wired Connector Models with M8 4-pin connectors, M8 3-pin connectors.
1 ms
*2
*2. Consult with your OMRON representative if a distance of more than 10 m is required. Models with large custom-size spots can be produced. These make optical
axis adjustment easier and allow the beam to be received more stably by the Receiver even if vibration is present.
E3Z-LT61 E3Z-LT81
Standard M8 Connector E3Z-LT66 E3Z-LT86
Retro-reflective with
MSR function
*3
*3. The Reflector is sold separately. Select the Reflector model most suited to the application.
Pre-wired (2 m)*1 *4
*4. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
E3Z-LR61 E3Z-LR81
Standard M8 Connector E3Z-LR66 E3Z-LR86
Distance-settable
(BGS Models)
Pre-wired (2 m)*1 E3Z-LL61 E3Z-LL81
Standard M8 Connector E3Z-LL66 E3Z-LL86
Pre-wired (2 m)*1
0.5 ms
E3Z-LL63 E3Z-LL83
Standard M8 Connector E3Z-LL68 E3Z-LL88
Slit width Sensing distance
Minimum detectable object
(typical)
Model Contents
0.5 mm dia. 3 m 0.1 mm dia. E39-S65A
One set
(contains Slits for both the
Emitter and Receiver)
Name Sensing distance (typical) Model Remarks
Reflector
15 m (300 mm) E39-R1S
• Retro-reflective models are not provided with
Reflectors.
• Separate the Sensor and the Reflector by at least the
distance given in parentheses.
• The MSR function is enabled.
7 m (200 mm) E39-R12
7 m (200 mm) E39-R6
Red light
60 m
(Using E39-R12)
(Using E39-R1)
7 m
(200 mm)
(Using E39-R6)
15 m
(300 mm
7 m
(200 mm)
20 to 40 mm
(Min. distance set)
20 to 300 mm
(Max. distance set)
25 to 40 mm
(Min. distance set)
25 to 300 mm
(Max. distance set)
To Next Page
Loading...
