Need help?Do you have a question about the Omron E3X-MDA Series and is the answer not in the manual?
General| Output Type | NPN/PNP |
|---|---|
| Operating Temperature | -25 to 55 °C |
| Storage Temperature | -40 to 70 °C |
| Material | Plastic |
| Degree of Protection | IP50 |
| Compatible Amplifier Series | E3X |
| Function | Amplifier |
| Response Time | 1 ms |
| Light Source | Red LED |
| Protection Circuit | Reverse polarity protection |
| Ambient Humidity | 35 to 85% RH (no condensation) |
Select the operating mode and choose settings.
Adjust power output based on detected light.
Set threshold value for reflection sensing.
Set threshold value by teaching.
Set detection sensitivity.
Set the operation mode and teaching settings.
Perform intelligent setup.
To Next Page
