6 Laser Photoelectric Sensor with Built-in Amplifier
Note: An emission stop function can be added to Through-beam Models as a custom function. Ask your OMRON representative for details.
Weight
(packed
state)
Pre-wired cable
(2 m)
Approx. 120 g Approx. 65 g
Standard
Connector
Approx. 30 g Approx. 20 g
Material
Case PBT (polybutylene terephthalate)
Lens
Modified polyarylate
resin
Methacrylic resin Modified polyarylate resin
Accessories
Instruction manual
(Neither Reflectors nor Mounting Brackets are provided with any of the above models.)
*1. Consult with your OMRON representative if a distance of more than 10 m is required. Models with large custom-size spots can be produced. These make optical
axis adjustment easier and allow the beam to be received more stably by the Receiver even if vibration is present.
Sensing
method
Through-beam
Retro-reflective with
MSR function
Distance-settable (BGS models)
Response Standard response High-speed response
Model
NPN output E3Z-LT61/-LT66 E3Z-LR61/-LR66 E3Z-LL61/-LL66 E3Z-LL63/-LL68
Item PNP output E3Z-LT81/-LT86 E3Z-LR81/-LR86 E3Z-LL81/-LL86 E3Z-LL83/-LL88
To Next Page
Loading...
