Omron E3Z series Network Connection Guide

7
．
IO-Link Connection Procedure
12
7.6. IO-Link Communication Status
Check
Confirm that cyclic communications in the IO-Link
system performs normally.
↓
7.6.1. Checking the Connection Status Check the connection status of each device.
↓
7.6.2. Checking the Receive Data Check that the correct data are received.

Omron E3Z series Specifications

General

Protection Rating	IP67
Response Time	1 ms or less
Accessory Type	Photoelectric Sensor
Connection Type	Pre-wired, Connector
Sensing Method	Through-beam, Retro-reflective, Diffuse-reflective
Light Source	Infrared LED, Red LED
Power Supply Voltage	12 to 24 VDC
Output Type	NPN, PNP
Operating Temperature	-25 to 55°C
Sensing Distance	varies by model (up to 30m for Through-beam)