Omron E5AC

E5EC/E5AC
26
Nomenclature
Temperature unit
Front-panel Setup Tool port
Use S Key to change the digit (default setting).
Use the M Key to change to another parameter.
No. 1 display
No. 2 display
No. 3 display
PV or specified parameter
SP or specified parameter value
Manipulated value or other value
Top View of E5EC
Use the U D Keys to set
the parameter.
Top-panel
Setup
Tool port
Front panel
Press O Key once to go to Adjustment Level.
Press O Key for at least 3 seconds to go to Initial Setting Level.
Operation indicators
Manipulated value or other value
E5EC
Front Panel
Temperature unit
Operation indicators
Press the S Key to change the digit (default setting).
Press the M Key to change to another parameter.
No. 1 display
No. 2 display
No. 3 display
Press the O Key once to go to the Adjustment Level.
Press the O Key for at least 3 seconds to go to the Initial Setting Level.
PV or specified parameter
SP or specified parameter value
Manipulated value or other value
Press the U or D Key to set the parameter.
Top View of E5AC
Front-panel Setup Tool port
Top-panel
Setup
Tool port
E5AC