Omron E5AC

E5EC/E5AC
18
Optional Products (Order Separately)
USB-Serial Conversion Cable
Communications Conversion Cable
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the front-panel Setup Tool
port.
Terminal Covers
Waterproof Packing
Note: This Waterproof Packing is provided with the Digital
Temperature Controller.
Waterproof Cover
Front Port Cover
Note: This Front Port Cover is provided with the Digital Temperature
Controller.
Mounting Adapter
Note: This Mounting Adapter is provided with the Digital Temperature
Controller.
Current Transformers (CTs)
CX-Thermo Support Software
Note: CX-Thermo version 4.5 or higher is required for the E5EC.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Model
E58-CIFQ2
Model
E58-CIFQ2-E
Model
E53-COV24
Applicable Controller Model
E5EC Y92S-P9
E5AC Y92S-P10
Applicable Controller Model
E5EC Y92A-49N
E5AC Y92A-96N
Model
Y92S-P7
Model
Y92F-51
Hole diameter Model
5.8 mm E54-CT1
12.0 mm E54-CT3
Model
EST2-2C-MV4