E5DC
34
Optional Products (Order Separately)
USB-Serial Conversion Cable
Conversion Cable
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the front-panel Setup Tool
port.
Current Transformers (CTs)
Mounting Adapters
Short Bars
CX-Thermo Support Software
Note: CX-Thermo version 4.6 or higher is required for the E5DC.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
End Plate
Spacer
DIN Tracks
Unit Labels
Model
E58-CIFQ2
Model
E58-CIFQ2-E
Hole diameter Model
5.8 mm E54-CT1
12.0 mm E54-CT3
Model
Y92F-53
Model
Y92S-P11
Model
EST2-2C-MV4
Model
PFP-M
Model
PFP-S
Model
PFP-100N
PFP-50N
Model
Y92S-L2
To Next Page
Loading...
