5 - 11
5 Communications Data for Modbus
E5@C Digital Temperature Controllers Communications Manual (H175)
5-1 Variable Area (Setting Range) List
5
*1 Selection is possible only with the E5CC-U, E5DC, and E5GC and only when there is a control output that is a linear
current output.
(The E5CC-U must be manufactured in May 2014 or later (version 2.2 or higher) and the E5DC must be manufactured in
July 2014 or later (version 2.2 or higher).)
0E2C 2E16 Simple Transfer Output 1
Upper Limit
H'FFFFF831 to H'0000270F (−1999 to 9999)
*1
Initial setting
0E2E 2E17 Simple Transfer Output 1
Lower Limit
H'FFFFF831 to H'0000270F (−1999 to 9999)
*1
Address
Parameter name Setting (monitor) value Level
Four-byte
mode
Two-byte
mode