Omron E5DC Communications Manual

6 Programless Communications
6 - 42
E5@C Digital Temperature Controllers Communications Manual (H175)
(5) Transfer the project that was created on the Sysmac Studio to the PLC.
Select Controller
− Online from the menu bar to go online and then select Controller-
Transfer
− To Controller. The Transfer to Controller Dialog Box will be displayed. Click the
Execute Button to transfer the project to the Controller.
A message saying that forced status will be canceled will be displayed. Click the Yes
Button.
If a dialog box that says execution ended normally is displayed, the transfer has been
concluded. Click the OK Button.

Omron E5DC Specifications

General

Brand	Omron
Model	E5DC
Category	Temperature Controller
Language	English