E5EC-T/E5AC-T
98
Optional Products (Order Separately)
USB-Serial Conversion Cable
Communications Conversion Cable
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the front-panel Setup Tool
port.
Terminal Covers
Note: The Terminal Covers E53-COV24 are provided with the Digital
Temperature Controller.
Waterproof Packing
Note: This Waterproof Packing is provided with the Digital
Temperature Controller.
Waterproof Cover
Front Port Cover
Note: This Front Port Cover is provided with the Digital Temperature
Controller.
Mounting Adapter
Note: This Mounting Adapter is provided with the Digital Temperature
Controller.
Current Transformers (CTs)
*Lead wires are included with these CTs. If UL certification is required, use
these CTs.
CX-Thermo Support Software
Note: CX-Thermo version 4.61 or higher is required for the E5EC-T/
E5AC-T.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Model
E58-CIFQ2
Model
E58-CIFQ2-E
Model
E53-COV24 (3pcs)
Applicable Controller Model
E5EC-T Y92S-P9
E5AC-T Y92S-P10
Applicable Controller Model
E5EC-T Y92A-49N
E5AC-T Y92A-96N
Model
Y92S-P7
Model
Y92F-51 (2pcs)
Hole diameter Model
5.8 mm E54-CT1
5.8 mm E54-CT1L*
12.0 mm E54-CT3
12.0 mm E54-CT3L*
Model
EST2-2C-MV4
To Next Page
Loading...
