Omron ES100 User Manual

omRon
DigitalController
Cat.No.HO72‑E1‑2
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑[EndofPage9244]‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑

Omron ES100 Specifications

General

Manufacturer	Omron
Input Voltage	24 VDC
Output Voltage	24 VDC
Category	Controller
Programming Language	Ladder Logic
Programming Method	Handheld Programmer
Operating Temperature	0°C to 55°C

Summary

Chapter 1 Serial Communications

1.1 Introduction to Serial Communications

Explains serial communication basics, interface types, and data frame configurations for the ES100.

1.2 Preparations for Serial Communication

Details switch settings, wiring terminals, and cable connections required for serial communication setup.

1.3 Commands and Responses

Covers command configuration, lists, variable area, program data, operating instructions, and controller status.

1.4 Error Code Tables

Lists communication errors and ES100-specific errors with their corresponding codes and descriptions.

1.5 Program Examples for Serial Communication

Provides guidance and examples for using programs with serial communication features.

Chapter 2 BCD Communications

2.1 Introduction to BCD Communications

Defines BCD communications, command types, and PLC conditions required for its operation.

2.2 Preparations for BCD Communication

Covers setting parameters, wiring, I/O connectors, and terminal block connections for BCD communication.

2.3 Timing of Operations for BCD

Explains the signal timing for write and read operations in BCD communication.

2.4 Assigning DSL Codes for BCD

Provides a comprehensive list of DSL codes for write and read commands in BCD communication.

2.5 Description of Data Items in BCD

Details the format and meaning of 4-digit, 3-digit, 2-digit, and 1-digit data sets.

2.6 Program Examples for BCD

Illustrates program examples, I/O, and DM assignments for BCD communication.