Omron H3CR-A User Manual

H5S
H5S
249
Mounting Dimensions
Flush Mounting (H5S-B)
Surface Mounting (H5S-FB)
Panel Cutout
Mounting Holes
Track Mounting (H5S-FB with Y92F-90)
79.8 (Note 2)
Note: 1. With mounting track PFP-100N or PFP-50N
2. With mounting track PFP-100N2
Note: Panel thickness: 1 to 5 mm
When mounting the time switch on a soft iron panel using the M4 tapping screws, the diameter of the mounting holes drilled into the panel vary
according to the panel thickness, as follows. If the panel is die-cast, aluminum, the hole diameter should be slightly larger.
Panel thickness
0.8 1.0 1.2 1.6 2.0 2.6 3.2 4.0
Hole diameter 3.6 3.7
Accessories (Order Separately)
Y92A-72C Protective Cover Y92F-90 Track Mounting Base

Omron H3CR-A Specifications

General

Time Range	0.05 seconds to 300 hours
Output Type	Relay
Mounting Type	DIN Rail
Operating Temperature	-10°C to 55°C
Contact Form	SPDT
Number of Pins	8
Contact Rating	5A at 250VAC
Storage Temperature	-25°C to 65°C
Type	Solid State Timer
Dimensions	48 mm x 48 mm
Operating Mode	ON-delay, OFF-delay, Interval, One-shot
Operating Voltage	24V DC, 100-240V AC