EasyManua.ls Logo

Omron H3CR Series - User Manual

Omron H3CR Series
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3
Solid-state Timer H3CR
DIN 48 x 48-mm Multifunctional Timer Series
Conforms to EN61812-1 and EN60664-1
(VDE0110) 4 kV/2 for Low Voltage, and EMC
Directives.
Approved by UL and CSA.
Lloyds/NK approvals.
Six-language instruction manual provided.
Broad Line-up of H3CR Series
H3CR
Multifunctional Timer
H3CR-A
H3CR-AS
H3CR-AP
H3CR-A8
H3CR-A8S
H3CR-A8E
Twin Timer
H3CR-F
H3CR-FN
H3CR-F-300
H3CR-FN-300
H3CR-F8
H3CR-F8N
H3CR-F8-300
H3CR-F8N-300
Star-delta Timer
H3CR-G8L
H3CR-G8EL
Power OFF-delay Timer
H3CR-HRL
H3CR-H8L
H3CR-H8RL
H3CR-HH3CR-GH3CR-F
Note: H3CR-AS, H3CR-A8S: Transistor output models
11-pin model
8-pin model
8-pin with
instantaneous
contact output
model
11-pin model
8-pin model
8-pin model
8-pin model
11-pin model
H3CR-A
Contents
Solid-state Timer
H3CR-A 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H3CR-F 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H3CR-G 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H3CR-H 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common to ALL Timers
Operation 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloaded from Elcodis.com electronic components distributor
Question and Answer IconNeed help?

Do you have a question about the Omron H3CR Series and is the answer not in the manual?

Omron H3CR Series Specifications

General IconGeneral
Time Range0.05 seconds to 300 hours
Output TypeRelay
Number of Pins8 or 11 (depending on model)
TypeSolid State Timer
Mounting TypeDIN Rail
Operating Temperature-10 to 55°C
Contact Rating5A at 250V AC
Contact ConfigurationSPDT
Storage Temperature-25 to 65°C
Operating ModesOn-delay, One-shot, Interval, Flicker, Signal On/Off

Summary

Ordering Information (H3 CR-A)

H3 CR-A: 11-pin and 8-pin Models

Details for 11-pin and 8-pin H3CR-A models, covering output, supply, input, time range, and modes.

Model Number Legend (H3 CR-A)

H3 CR-A Model Number Explanation

Explains the numbering system for H3CR-A models, including pins, input, output, and suffixes.

Accessories and Specifications (H3 CR-A)

Optional Accessories

Lists optional accessories like mounting adapters, tracks, sockets, covers, and clips.

General Specifications

Covers operating modes, pin types, input/output, mounting, and standards for H3CR-A.

Time Ranges and Ratings (H3 CR-A)

Time Range Options

Details time ranges for standard and double H3CR-A models.

Electrical Ratings and Input

Specifies voltage, consumption, input types, and control output ratings.

Characteristics (H3 CR-A)

Performance and Electrical Properties

Covers accuracy, timing, electrical strength, noise immunity, and durability.

Environmental and Compliance Data

Details ambient conditions, EMC, protection degree, and weight.

Engineering Data and Ratings (H3 CR-A)

Switching Performance Data

Graph showing expected switching operations based on load current.

Detailed Ratings and Notes

Repeats supply voltage, consumption, and output specs with additional notes.

Characteristics (H3 CR-A)

Key Performance Metrics

Covers accuracy, timing, electrical strength, noise immunity, and durability.

Environmental and Compliance Data

Details ambient conditions, EMC, case color, and weight.

Operation and I;O Functions (H3 CR-A)

Block Diagrams Overview

Illustrates the internal functional blocks for H3CR-A/AS and H3CR-AP models.

Input;Output Functionality

Explains the functions of Start, Reset, Gate inputs and Control output.

Timing Charts (H3 CR-A)

Modes A (ON-delay) and B;B2 (Flicker)

Shows timing diagrams for ON-delay and Flicker modes.

Timing Charts (H3 CR-A)

Modes C, D, E, G, J Examples

Shows timing diagrams for Delay, Interval, and One-shot modes.

Gate Signal Input Timing

Illustrates the timing for gate signal input in ON-delay mode.

Timing Charts (H3 CR-A)

Modes D, E, G, J Examples

Shows timing diagrams for Signal OFF-delay, Interval, Signal ON/OFF-delay, and One-shot modes.

Timing Charts for H3 CR-A8;A8 S

Modes A, B2, E, J Examples

Timing diagrams for ON-delay, Flicker ON start, Interval, and One-shot modes for A8/A8S models.

Timing Charts for H3 CR-A8 E

Modes A, B2, E, J Examples

Timing diagrams for ON-delay, Flicker ON start, Interval, and One-shot modes for A8E models.

Dimensions (H3 CR-A Series)

Timer and Socket Dimensions

Shows dimensions for H3CR-A series models and connecting sockets.

Accessory Dimensions

Displays dimensions of the timer with set rings and connecting sockets.

Installation and Terminal Arrangements (H3 CR-A)

11-pin Model Terminal Connections

Illustrates terminal connections for H3CR-A, AS, and AP models.

8-pin Model Terminal Connections

Illustrates terminal connections for H3CR-A8, A8S, and A8E models.

Input Connections (H3 CR-A;-AS)

No-voltage Input Wiring and Levels

Explains wiring for no-contact and contact inputs, including signal level details.

Input Connections (H3 CR-AP)

Voltage Input Wiring and Levels

Explains voltage input wiring for H3CR-AP, including no-contact, contact, and signal levels.

Application Examples (H3 CR-A)

Mode A (ON-delay) and B;B2 (Flicker) Examples

Shows examples for ON-delay and Flicker modes.

Application Examples (H3 CR-A)

Mode A (ON-delay) and B;B2 (Flicker) Examples

Examples for Gate Signal control and Flicker Reset.

Application Examples (H3 CR-A)

Modes B, C, D Examples

Examples for Flicker, ON/OFF-delay, and OFF-delay operations.

Application Examples (H3 CR-A)

Modes D, E Examples

Examples for Signal OFF-delay and Interval operations.

Ordering Information (H3 CR-F)

H3 CR-F Flicker Start Models

Ordering details for H3CR-F Flicker OFF and ON start models.

Model Number Legend

Explains the numbering system for H3CR-F models.

Accessories and Specifications (H3 CR-F)

Optional Accessories

Lists optional accessories like mounting adapters, tracks, sockets, and clips.

General and Time Range Specifications

Covers general specs and detailed time ranges for H3CR-F.

Ratings and Characteristics (H3 CR-F)

Electrical Ratings and Performance

Specifies voltage, consumption, output ratings, accuracy, and timing.

Environmental and Compliance Data

Details ambient conditions, EMC, enclosure ratings, and weight.

Engineering Data, Nomenclature, and Operation (H3 CR-F)

Performance Data and Controls

Shows switching performance graph and identifies front panel controls.

Block Diagrams and I;O Functions

Illustrates internal blocks and explains input/output functions for H3CR-F.

Timing Chart (H3 CR-F)

Flicker Start Modes Timing

Timing diagrams for Flicker OFF start and Flicker ON start modes.

Ordering Information (H3 CR-G)

H3 CR-G Output and Model Variants

Ordering details for time-limit contact and dual output models.

Model Number Legend

Explains the numbering system for H3CR-G models.

Accessories and Specifications (H3 CR-G)

Optional Accessories

Lists optional accessories like mounting adapters, tracks, sockets, and clips.

General and Time Range Specifications

Covers general specs and detailed time ranges for H3CR-G.

Ratings and Characteristics (H3 CR-G)

Electrical Ratings and Performance

Specifies voltage, consumption, output ratings, accuracy, and timing.

Environmental and Compliance Data

Details ambient conditions, EMC, enclosure ratings, and weight.

Engineering Data and Nomenclature (H3 CR-G)

Performance Data and Controls

Shows switching performance graph and identifies front panel controls.

Time Range and Transfer Time Selectors

Locates time range and transfer time selectors and their displays.

Operation and I;O Functions (H3 CR-G)

Block Diagrams Overview

Illustrates the internal functional blocks for H3CR-G8L and H3CR-G8EL.

Input;Output Functionality

Explains input and output functions for the H3CR-G timer.

Timing Chart (H3 CR-G)

H3 CR-G8 L;-G8 EL Timing Diagrams

Shows timing diagrams for star operation, transfer time, and indicators.

Ordering Information (H3 CR-H)

H3 CR-H S-series and M-series Models

Ordering details for S-series (12s) and M-series (12min) H3CR-H timers.

Model Number Legend

Explains the numbering system for H3CR-H models.

Accessories and Specifications (H3 CR-H)

Optional Accessories

Lists optional accessories like mounting adapters, tracks, sockets, and clips.

General and Time Range Specifications

Covers general specs and detailed time ranges for H3CR-H.

Ratings and Characteristics (H3 CR-H)

Electrical Ratings and Performance

Specifies voltage, consumption, output ratings, accuracy, and timing.

Environmental and Compliance Data

Details ambient conditions, EMC, enclosure ratings, and weight.

Engineering Data and Nomenclature (H3 CR-H)

Performance Data and Controls

Shows switching performance graph and identifies front panel controls.

Operation and I;O Functions (H3 CR-H)

Block Diagrams and I;O Functions

Illustrates functional blocks and explains Reset input and Control output functions for H3CR-H.

Timing Chart (H3 CR-H)

H3 CR-H8 L, H3 CR-H8 RL, H3 CR-HRL Timing

Shows timing diagrams for H3CR-H8L, H3CR-H8RL, and H3CR-HRL models.

Common Operation and Basic Setting

Basic Setting Procedures

Explains how to use selectors for time unit, range, and operating mode selection.

Selecting Operating Mode and Time Range

Details mode selection and time setting for H3CR-A multifunctional timers.

Common Operation: Time Setting Examples

Time Setting for H3 CR-F, G, and H Series

Explains time setting procedures for H3CR-F, G, and H timers.

Using Time Setting Rings

Details using Time Setting Rings for setting specific times and limiting ranges.

Accessories: Flush Mounting Adapters

Flush Mounting Adapter Details

Details dimensions and mounting for Y92F-30, Y92F-70/73, and Y92F-71/74 adapters.

Connecting Sockets: P2 CF Series

P2 CF-08; P2 CF-08-E Socket Details

Shows dimensions, terminal arrangement, and mounting holes for P2CF-08 sockets.

P2 CF-11; P2 CF-11-E Socket Details

Shows dimensions, terminal arrangement, and mounting holes for P2CF-11 sockets.

Connecting Sockets and Terminal Covers

P3 G-08; P3 GA-11 Socket Details

Shows dimensions and terminal arrangement for P3G-08 and P3GA-11 sockets.

Y92 A-48 G Terminal Cover

Details the Y92A-48G terminal cover, its dimensions, and application.

Mounting Tracks, End Plates, and Spacers

PFP Series Mounting Hardware

Shows dimensions for PFP mounting tracks, end plate, and spacer.

Protective Covers and Hold-down Clips

Y92 A-48 B Protective Cover

Details the Y92A-48B protective cover and its features.

Hold-down Clips for Sockets

Shows hold-down clips for specific socket types.

Time Setting Rings and Panel Covers

Using Time Setting Rings for Setting

Explains using Time Setting Rings for setting specific times and limiting ranges.

Common Precautions

Setting, Power Supply, and Environment

Advises on setting, power supply, operating environment, and noisy locations.

EN61812-1 Conformance and Other Precautions

Outlines conformance conditions, control board mounting, and other safety advice.

H3 CR-A Specific Precautions

Power Supply and Input;Output Wiring

Specific advice on power supply and input/output wiring for H3CR-A/-AS/-AP models.

Input and Power Supply Circuit Relationships

H3 CR-A;-AS Wiring Practices

Details correct input wiring to prevent short-circuits for H3CR-A/-AS.

H3 CR-AP Wiring and Common Notes

Details H3CR-AP wiring and common notes on input circuit independence and output isolation.

H3 CR-H Specific Precautions

Power Supply, Wiring, and Operation Precautions

Advises on power supply, wiring, and operation intervals for H3CR-H.

Input;Output and Other Precautions

Explains input/output wiring and other advice for H3CR-H models.

Related product manuals