To Next PageTo Next Page
Need help?Do you have a question about the Omron H3CR-A8E and is the answer not in the manual?
General| Type | Digital Timer |
|---|---|
| Output Type | Relay Output |
| Number of Outputs | 1 |
| Width | 48 mm |
| Number of Pins | 8 |
| Contact Form | SPDT |
| Operating Temperature | -10 to 55 °C |
| Storage Temperature | -25 to 65 °C |
| Mounting | DIN Rail |
| Operating Mode | On-delay, Off-delay, Interval |
| Terminal Type | Screw |
| Contact Rating | 5 A at 250 VAC |
Presents the range of H3CR series timers including models A, F, G, and H.
Details on ordering H3CR-A timers, including 11-pin/8-pin models and model number structure.
Covers general specifications, ratings, time ranges, and key performance characteristics.
Provides engineering data, nomenclature, block diagrams, I/O functions, and timing charts for H3CR-A timers.
Details product dimensions, mounting methods, terminal arrangements, and input connection types.
Illustrates practical applications for various operating modes like ON-delay and Flicker.
Covers ordering, model legend, specifications, and characteristics for H3CR-F timers.
Provides engineering data, nomenclature, and operation details for H3CR-F timers.
Covers ordering, model legend, specifications, and characteristics for H3CR-G timers.
Provides engineering data, nomenclature, operation, and timing for H3CR-G timers.
Details the dimensions and terminal arrangements for H3CR-G timers.
Covers ordering, model legend, specifications, and characteristics for H3CR-H timers.
Details performance characteristics, environmental ratings, and safety compliance.
Provides engineering data, nomenclature, operation, and timing for H3CR-H timers.
Details the dimensions and terminal arrangements for H3CR-H timers.
Explains basic operation principles and procedures for setting timers.
Details time setting knobs, adjustable time setting rings, and panel covers.
Lists optional mounting adapters, connecting sockets, and mounting tracks.
Describes protective covers, hold-down clips, and time setting rings for panel protection.
Covers precautions for setting, power supplies, operating environment, and EN compliance.
Specific precautions for H3CR-A input circuits and power supply connections.
Precautions for H3CR-H power supplies, wiring, operation, and input/output.
