Omron H7CL Series

1
Electronic Counter H7CL
DIN 48 x 48 mm LED Counter with
IP66/NEMA 4 Protection for a Wide
Variety of Applications
Water- and dust-protected for severe environ-
ments.
Large, high-visibility LED displays.
Simple setting with Increment and Decrement
Keys.
Conforms to EMC standards.
Conforms to IEC standards, and approved by UL
and CSA.
Six-language instruction manual provided.
RC
Ordering Information
Outputs Control power supply Model
W ithout Shock Prevention Cover W ith Shock Prevention Cover
Contact output 100 to 240 V AC H7CL-A ---
12 to 24 VDC H7CL-AD H7CL-AD-500
T ransistor output
(Ph t l )
100 to 240 V AC H7CL-AS ---
a s s o ou u
(Photocoupler)
12 to 24 VDC H7CL-ADS H7CL-ADS-500
Accessories (Order Separately)
Name Model
Soft Cover Y92A-48F1
Hard Cover Y92A-48
Shock Prevention Cover
(for DC models only)
Y92A-48T
Back Connecting Socket for flush mounting
(for AC models only)
P3GA-11
DIN T rack/Surface Mounting/Front Connecting
Socket (for AC models only)
P2CF-11
Rubber Packing (see note) Y92S-29
Flush Mounting Adaptor (see note) Y92F-30
Note: Supplied with each Unit.
Model Number Legend
H7CL-Ajjj
1234
1. Fixed
2. D: DC input
3. S: T
ransistor output

Omron H7CL Series Specifications

General

Brand	Omron
Model	H7CL Series
Category	Cash Counter
Language	English

Summary

Ordering Information

Accessories (Order Separately)

Details on optional accessories available for separate purchase.

Model Number Legend

Explanation of how to construct product model numbers.

Specifications

Ratings

Key technical specifications including voltage, current, and speed.

Characteristics

Nomenclature

Identification and description of product indicators and operational keys.

Operation

DIP Switch Setting

Configuration of internal DIP switches for counting speed and input modes.

Operating Modes

Explanation of different operational modes like Count Stop and Auto-reset.

Dimensions

Mounting Options and Panel Cutouts

Information on physical dimensions, mounting methods, and panel cutouts.

Installation

Terminal Arrangement and Input Circuitry

Diagrams and explanations of wiring terminals and input signal circuits.

Input Connections

Details on connecting external inputs like count, reset, and gate signals.

Two-wire Sensor and Key Protection Input

Specifics for two-wire sensor compatibility and key protection input wiring.

Precautions

Power Supplies and Transistor Output

Guidelines for power supply connection and transistor output usage.

Operating Environment and Set Value Handling

Recommendations for installation environment and set value modification.

Reset, Output Timing, and Flush Mounting

Information on reset functions, output delays, and flush mounting procedures.

Self-diagnostic Function and Other Precautions

Details on error display, self-diagnosis, and general cautionary notes.