To Next PageTo Next Page
Need help?Do you have a question about the Omron H7CR-B Series and is the answer not in the manual?
General| Model | H7CR-B Series |
|---|---|
| Display | LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Reset Method | Manual or automatic |
| Counting Speed (bills) | Up to 1, 500 bills per minute |
| Power Supply (bills) | AC 100-240V, 50/60Hz |
| Hopper Capacity | 200 bills |
| Stacker Capacity | 200 bills |
Details specifications for economy models, including display and input types.
Details specifications for standard models, including display and input types.
Covers counters with reversible counting functions for +/- range operations.
Describes compact counters with a shorter body design for space-saving applications.
Details counters designed for easy installation and replacement using socket mounts.
Lists optional accessories for mounting, protection, and connectivity.
Detailed specifications for H7CR-A, -B, and -C series, covering input modes, outputs, and display.
Detailed specifications for H7CR-S, -8, and -11 series, covering input modes, outputs, and display.
Explains the various output modes (N, F, C, R, K, etc.) and their functions.
Provides electrical and environmental ratings for different H7CR counter models.
Lists physical and electrical characteristics like insulation resistance, vibration, and weight.
Details the input signals, reset, key protection, and output operations.
Explains how to use the prescale function to convert input counts to desired units.
Illustrates timing diagrams for various input modes like Up, Down, and Reversible.
Illustrates output operations for H7CR-A and H7CR-B models in modes N, F, C.
Details output operations for standard counters in modes R, K, P.
Continues detailing output operations for standard counters in modes Q, A.
Shows output operations for H7CR-C models in modes K, D, and L.
Details output operations for H7CR-C model in mode H.
Provides dimensional drawings for H7CR-A, -B, and -C series counters.
Provides dimensional drawings for the compact H7CR-S short body counter.
Details the H7CR-8 and H7CR-11 socket-mount counter types.
Covers various socket types (P3G, P2CF) and their connection details.
Details various socket types like P3G-08, P2CF-11, P2CF-11-E, P3GA-11 and their arrangements.
Describes mounting tracks (PFP series) and spacers for installation.
Details soft plastic and terminal covers for protection against dirt, water, and wiring.
Explains the use and installation of the Y92F-30 panel mounting adapter.
Shows panel cutout dimensions for side-by-side counter mounting.
Illustrates wiring diagrams for H7CR-A series single preset output types.
Shows wiring for H7CR-B/C series single and double preset output types.
Details wiring for H7CR-8/11 socket-mount types with transistor outputs.
Explains non-voltage and voltage input signal connections and their ratings.
Details the connection for rotary encoder inputs on H7CR-B models.
Identifies key components and displays on the H7CR counter interface.
Guides through switching between Run mode and Setting mode for operation.
Lists default settings for H7CR-A, -B, and -C series before initial operation.
Lists default settings for H7CR-S, -8, and -11 series before initial operation.
Describes how to set preset values in Run mode for different counter series.
Details changing input mode, output mode, timing, speed, and reset times.
Explains settings for decimal point position, scaling, and key protection levels.
Provides examples of changing set values and details output delay times.
Illustrates how to change settings in the Function Setting Mode.
Covers external power supply capacity and connection methods for reliable operation.
Advises on power supply, transistor output, and self-diagnostic functions.
Discusses environmental factors, electrical noise, and disposal.
Describes basic modes like N, A, F, K for single operations and their applications.
Explains repetitive modes like R, C, Q, P and their use in continuous processes.
