Omron H7CZ-L8

1
New Product
Easy to Use and Easy to Read.
Basic Features
• Character height of 10 mm for better readability.
• Operation is simplified by the Up Key for each digit.
Safety and Reliability
• Power supply circuit and input circuits are isolated inside the
Counter.
• Set value limit function prevents unexpected operation of output
devices caused by setting mistakes.
• Output counter function helps in managing the service life of the
Counter or the load.
Other Features
• Waterproof, dust-proof structure (UL508 Type 4X and IP66).
• Key protection.
Features
Basic Features
Better Readability
Character Height of 10 mm with a Wide Viewing Angle.
The Easiest Operation
Operation is simplified by the Up Key for
each digit.
Safety and Reliability
Isolated Power Supply and Input Circuits
Power supply circuit and input circuits are isolated inside the Counter.
Previous non-isolated counters had wiring restrictions and could be
damaged if wired incorrectly. The H7CZ removes these worries.
Set Value Limit
You can set an upper limit for the set value to prevent unexpected
operation of output devices caused by setting mistakes.
Output Counter
The output counter counts the number of times the output turns ON
(alarms can be displayed and the count can be monitored in
increments of 1,000 operations). This counter is useful in managing
the service life of the Counter or the load.
Other Features
Waterproof, Dust-proof Structure (UL508 Type
4X and IP66)
Worry-free application is possible in locations subject to water.
Note: When the Y92S-29 Waterproof Packing is used.
Key Protection
Select from any of seven protection patterns. Use the best one for the
application.
Refer to Safety Precautions on page 17.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
10 mm
(actual size)
Clear
Confirmation
Easy to read from the top,
bottom, and sides.
For 1,000 pieces
No overflow
Setting the upper limit of the set
value enables worry-free operation.
Digital Counter
H7CZ

Omron H7CZ-L8 Specifications

General

Model	H7CZ-L8
Type	Cash Counter
Display	LCD
Power Supply Frequency	50/60 Hz
Power Supply	AC 100-240V
Hopper Capacity	200 notes
Detection Methods	UV, MG

Summary

Features

Better Readability

The Easiest Operation

Safety and Reliability

Isolated power supply and input circuits, set value limit.

Model Number Structure

Ordering Information

Lists available models and accessories.

Specifications

Ratings

Power supply voltage, operating voltage fluctuation, power consumption.

Input Method

Output Mode

Characteristics

Applicable Standards

IO Functions

Describes how the counter operates with inputs and outputs.

Connections

Terminal Arrangement

Input Connections

Details different input methods like NPN, contact, and sensor.

No-voltage Input Signal Levels

Operating Procedures

Setting Procedure Guide

Step-by-step guide for configuring input mode, output mode, counting speed, reset, decimal point, and prescale.

Function Setting Mode

Set Value Upper Limit

Key Protect Level

Explanation of Functions

Input Mode and Reset

Explains input mode, counting speed, reset input signal width, decimal point position.

Prescale Value

Output Mode and Control

Explains output modes, one-shot time, set value limit, key protect, alarm.

Operation in Run Mode

Setting Present and Set Values

Input Modes and IO Functions

Explains UP/DOWN increment modes and I/O functions.

InputOutput Mode Settings

Input Modes and Output Modes N, F, C, R, K-1

Explains input modes and operation for output modes N, F, C, R, K-1.

Output Mode Settings (Continued)

Output Modes P, Q, A

Details the operation for output modes P, Q, A.

Self-diagnostic Function

Error Displays and Correction

Safety Precautions

General Warnings

Covers electrical shock, fire hazards, and handling precautions.

Precautions for Safe Use

Details panel mounting, operating environment, and installation guidelines.

Precautions for Correct Use

Power-On Behavior and Settings

Operational Considerations