Omron H7CL-AD-500

1
Electronic Counter H7CL
DIN 48 x 48 mm LED Counter with
IP66/NEMA 4 Protection for a Wide
Variety of Applications
Water- and dust-protected for severe environ-
ments.
Large, high-visibility LED displays.
Simple setting with Increment and Decrement
Keys.
Conforms to EMC standards.
Conforms to IEC standards, and approved by UL
and CSA.
Six-language instruction manual provided.
RC
Ordering Information
Outputs Control power supply Model
W ithout Shock Prevention Cover W ith Shock Prevention Cover
Contact output 100 to 240 V AC H7CL-A ---
12 to 24 VDC H7CL-AD H7CL-AD-500
T ransistor output
(Ph t l )
100 to 240 V AC H7CL-AS ---
a s s o ou u
(Photocoupler)
12 to 24 VDC H7CL-ADS H7CL-ADS-500
Accessories (Order Separately)
Name Model
Soft Cover Y92A-48F1
Hard Cover Y92A-48
Shock Prevention Cover
(for DC models only)
Y92A-48T
Back Connecting Socket for flush mounting
(for AC models only)
P3GA-11
DIN T rack/Surface Mounting/Front Connecting
Socket (for AC models only)
P2CF-11
Rubber Packing (see note) Y92S-29
Flush Mounting Adaptor (see note) Y92F-30
Note: Supplied with each Unit.
Model Number Legend
H7CL-Ajjj
1234
1. Fixed
2. D: DC input
3. S: T
ransistor output

Omron H7CL-AD-500 Specifications

General

Brand	Omron
Model	H7CL-AD-500
Category	Cash Counter
Language	English

Summary

Ordering Information

Accessories

List of optional accessories available for the electronic counter, including covers and adaptors.

Model Number Legend

Explains the meaning of digits used in the electronic counter's model numbers.

Specifications

Ratings

Details electrical ratings, operating voltage, current consumption, and maximum counting speeds.

Nomenclature

Indicator

Describes the function of the product's LEDs and displays.

Operation Key

Details the function of each key on the electronic counter's control panel.

Operation

DIP Switch Setting

Configuration options available via internal DIP switches for counting speed and input modes.

Operating Modes

Explains the different operating modes like Count Stop, Over-count, and Auto-reset.

Precautions

Power Supplies

Guidance on safe power supply connection and switching for the counter.

Transistor Output

Information on using the transistor output as NPN or PNP.

Operating Environment

Recommendations for installing the counter in areas with electronic noise or chemical exposure.

Set Value Change

Covers changing set values during operation and their impact on output status.