EasyManua.ls Logo

Omron H7EC - Specifications

Omron H7EC
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C-18
Self-powered Time Counter
H7ET
Specifications
General
Note: 1.
Only PNP/NPN universal DC voltage input models (-H models) have a backlight.
2.
-hours, -d-h, -h-m, and -h-m-s labels are included.
Ratings
Item H7ET-NV-
@
H7ET-NV-
@
H
H7ET-NFV-
@
H7ET-N-
@
H7ET-NV1-
@
H7ET-NV1-
@
H
H7ET-NFV1-
@
H7ET-N1-
@
Operating mode
Accumulating
Mounting method
Flush mounting
External connections
Screw terminals
Reset
External/Manual reset
Display
7-segment LCD with or without backlight, zero suppression (character height: 8.6 mm) (see note 1)
Number of digits
7
Time range
0.0h to 999999.9h
←→
0.0h to 3999d23.9h
(switchable with switch)
0s to 999h59min59s
←→
0.0min to 9999h59.9min
(switchable with switch)
Timer input
PNP/NPN univer-
sal DC voltage in-
put
AC/DC multi-volt-
age input
No-voltage input PNP/NPN univer-
sal DC voltage in-
put
AC/DC multi-volt-
age input
No-voltage input
Case color
Light gray or black (-B models)
Attachment
Waterproof packing, flush mounting bracket, time unit labels (see note 2)
Approved standard
UL863, CSA C22.2 No.14, Lloyds
Conforms to EN61010-1/IEC61010-1 (pollution degree2/overvoltage category
III
)
Conforms to VDE0106/P100
Item H7ET-NV
@
-
@
H7ET-NV
@
-
@
H
H7ET-NFV
@
-
@
H7ET-N
@
-
@
Supply voltage
Backlight model: 24 VDC (0.3 W max.)
(for backlight)
No-backlight model: Not required (pow-
ered by built-in battery)
Not required (powered by built-in battery)
Timer input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(Input impedance: Approx. 4.7 k
)
High (logic) level: 24 to 240 VAC/VDC,
50/60 Hz
Low (logic) level: 0 to 2.4 VAC/VDC, 50/
60 Hz
No voltage input
Maximum short-circuit impedance:
10 k
max.
Short-circuit residual voltage: 0.5 V max.
Minimum open impedance: 750 k
min.
Reset input
No voltage input
Maximum short-circuit impedance:
10 k
max.
Short-circuit residual voltage: 0.5 V max.
Minimum open impedance: 750 k
min.
Minimum pulse
width
1 s
Reset system
External reset and manual reset: Minimum signal width of 20 ms
Terminal screw
tightening torque
0.98 N·m max.
Ambient tempera-
ture
Operating: -10
°
C to 55
°
C (with no condensation or icing)
Storage: -25
°
C to 65
°
C (with no condensation or icing)
Ambient humidity
Operating: 25% to 85%

Related product manuals