Need help?Do you have a question about the Omron G9SP Series and is the answer not in the manual?
General| Type | Safety Controller |
|---|---|
| Programming Software | Sysmac Studio |
| Supply Voltage | 24 VDC |
| Input Voltage | 24 VDC |
| Operating Temperature | -10 to 55°C |
| Protection Rating | IP20 |
| Number of Safety Outputs | 4 |
| Safety Category | Category 4 |
| Communication Interfaces | Ethernet/IP |
| Programming | Function block programming |
| Vibration Resistance | 10 to 55 Hz |
| Weight | Varies depending on model |
Identifies target users for this manual, requiring knowledge of electrical systems.
Lists and briefly describes other OMRON manuals relevant to G9SP Safety Controllers.
Explains the general capabilities for communicating with OMRON standard PLCs.
Details the RS-232C serial communication setup for OMRON PLCs.
Describes Ethernet communication setup for OMRON standard PLCs.
Outlines the general functions for connecting to Mitsubishi Electric PLCs.
Provides details and examples for RS-232C serial communication with Mitsubishi PLCs.
Explains Ethernet communication setup and examples for Mitsubishi Electric PLCs.
Describes the general capabilities for connecting to Siemens standard PLCs.
Details RS-232C serial communication setup and examples for Siemens PLCs.
Explains Ethernet communication setup and examples for Siemens PLCs.
To Next Page
