C-46
Total Counter/Time Counter (DIN 48 x 24)
H7GP
Specifications
■
Ratings
Note: 1.
Contains 20% ripple (p-p) max.
2.
Only a non-voltage input (NPN transistor) is possible for the key protection input. Switching between the NPN and PNP input methods
does not affect the key protection input, i.e., a PNP input cannot be used.
Item 6-digit total counter 6-digit time counter
H7GP-C H7GP-CD H7GP-T H7GP-TD
Rated supply voltage
100 to 240 VAC
(50/60 Hz)
12 to 24 VDC
(see note 1)
100 to 240 VAC
(50/60 Hz)
12 to 24 VDC
(see note 1)
External power supply
50 mA at 12 VDC --- 50 mA at 12 VDC ---
Operating voltage range
85% to 110% of rated supply voltage
Power consumption
100 to 240 VAC: 6.5 VA max.
12 to 24 VDC: 0.6 W max.
Dimensions
48 x 24 x 80 mm (W x H x D)
Mounting method
Flush mounting
External connections
Screw terminals
Degree of protection
Panel surface: JEM IP66G and NEMA Type 4 (indoors)
Display
7-segment, negative transmissive LCD (with red backlight)
Digits
6 digits (8.5-mm-high characters)
Input mode
Up (increment) Accumulative
Max. counting speeds
30 Hz or 5 kHz (selected via DIP switch) ---
Counting range
0 to 999999 ---
Time specification
--- 0.1 to 99999.9 h/1 s to 99 h 59 min 59 s
Timing accuracy
---
±
100 ppm (-10
°
C to 55
°
C)
Memory backup
EEP-ROM: 200,000 operations min.
Input Input signals
Count, reset, and key protection (see note 2) Start, reset, and key protection (see note 2)
Input method
No-voltage input (NPN transistor input) or voltage input (PNP transistor input) (selected via DIP switch)
Count, reset,
start
No-voltage input (NPN transistor input)
Short-circuit (ON) impedance: 1 K
Ω
max.
Short-circuit (ON) residual voltage:2 VDC max.
Open (OFF) impedance: 100 k
Ω
min.
Voltage input (PNP transistor input)
Short-circuit (ON) impedance: 1 K
Ω
max.
ON voltage: 9 to 24 VDC
OFF voltage: 5 VDC max.
Open (OFF) impedance: 100 k
Ω
min.
Key protection
No-voltage input (NPN transistor input)
Short-circuit (ON) impedance: 1 K
Ω
max.
Short-circuit (ON) residual voltage:0.5 VDC max.
Open (OFF) impedance: 100 k
Ω
min.
Input re-
sponse
speed
Reset
20 or 1 ms (automatically switched according to
counting speed)
20 ms
Start
--- 20 ms
Key protection
Approx. 1 s Approx. 1 s
Reset system
External and manual resets
To Next Page
Loading...
