Omron H7EC - Page 76

C-82
Preset Counter/Timer
H8GN
Timer Function
Z Mode
Output quantity can be adjusted by changing the cycle time set in the adjustment level to 1 and by changing the ON duty (%) set value.
The set value shows the ON duty (%) and can be set to a value between 0 and 100 (%). When the cycle time is 0, the output will always be OFF.
When the cycle time is not 0 and when ON duty has been set to 0 (%), the output will always be OFF. When ON duty has been set to 100 (%), the
output will always be ON.
A mode: Signal ON-delay (See note.) B mode: Flicker (See note.)
D mode: Signal OFF-delay E mode: Interval
F mode: Accumulative Z mode: ON/OFF-duty adjustable flicker
0
0
Start
Gate
Reset
SV
DOWN
UP
SV
Timer display
Power
supply
Control
output
0
0
Start
Gate
Reset
SV
DOWN
UP
SV
Timer display
Power
supply
Control
output
0
0
Start
Gate
Reset
SV
DOWN
UP
SV
Timer display
Power
supply
Control
output
0
0
Start
Gate
Reset
SV
DOWN
UP
SV
Timer display
Power
supply
Control
output
0
0
Start
Gate
Reset
SV
DOWN
UP
SV
Timer display
Power
supply
Control
output
0
0
Start
Gate
Reset
DOWN
UP
Cycle time
Cycle time
Timer display
Power
supply
Control
output
ON duty setting
(%) ON time
ON duty setting
(%) ON time
Note: One-shot output or HOLD output can be selected for output:
Cycle time
ON duty (%)
Cycle time
Control output