Omron H8CA-SAL

Mounting style Surface/flush mounting
Operating function Preset counter/timer (selectable)
Operating system (mode) Counter: reversible (Three input modes and four operating modes are selectable)
Timer: time-limit operation, integrating operation (Four operating modes are
selectable.)
Backup power supply for memory protection Provided: Approx. 10 years at 20°C (68°F)
Number of counts 0 to 999999 (6 digits)
Timing ranges 0.00 to 9999.99 s, 0.0 to 99999.9 min, 0.0 to 99999.9 h (6 digits)
External connection Socket
Display type 6-digit backlit LCD; 8mm (0.32 in) Present Value, 4mm (0.16 in) Set Value
Count and reset input for counter function; No-voltage input * Voltage input
reset and gate input for timer function (solid-state/contact input)
Control output Contact Solid-state Contact Solid-state
Power supply/ AC 30 cps H8CA-SAL H8CA-SALS H8CA-SALV H8CA-SALVS
counting speed 1 kcps H8CA-SAH H8CA-SAHS H8CA-SAHV H8CA-SAHVS
DC 30 cps H8CA-SDL H8CA-SDLS H8CA-SDLV H8CA-SDLVS
1 kcps H8CA-SDH H8CA-SDHS H8CA-SDHV H8CA-SDHVS
* Do not use the contact input at a counting speed of 1 kcps.
Solid-State Counter/Timer H8CA-S
1/16 DIN, Easy-to-Operate
Combination Counter and Timer
■ Operation selectable as preset
counter or timer
■ 6-digit LCD display —
Present Value: 8 mm (.32 in)
Set Value: 4 mm (.16 in)
■ Nonsignificant zeros suppressible
from preset or count value display
■ Selectable power supply voltages 24
to 240 V AC and 12 to 120 V DC
■ Memory protection
■ 4 programmable output modes
available for both counter and timer
functions
Ordering Information
■ COUNTER/TIMER
■ ACCESSORIES
Description Part number
Sockets Bottom surface or track mounting, top screw terminals P2CF-11
Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3GA-11
Panel mounting adapter Fits behind panel, ideal for side by side installation (Use P3GA-11 socket) Y92F-30
Mounting track DIN rail, 50 cm (1.64 ft) length PFP-50N
DIN rail, 1 m (3.28 ft) length PFP-100N
End plate PFP-M
Spacer PFP-S
Power supply/
counting speed

Omron H8CA-SAL Specifications

General

Brand	Omron
Model	H8CA-SAL
Category	Cash Counter
Language	English

Summary

Ordering Information

CounterTimer Specifications

Key specifications for the H8CA-S counter/timer, including operating modes and connection types.

Product Specifications

Ratings and Operating Ranges

Performance Characteristics

InputOutput Signal Functions

Signal Input Type Details

Output Mode Operation

Programming and Setting Functions

Selecting CounterTimer Functions

Step-by-step guide for choosing between counter and timer modes, and setting input/output modes.

Function Mode Setting Example

Numeric Value Presetting

How to Preset Values

Instructions for presetting count and timer values, applicable with power ON or OFF.

Terminal Connections and Cautions

Terminal Layout and Power Connection

Diagrams of terminal arrangements and guidance for connecting AC and DC power supplies.

Connection Safety and Best Practices

Output and Input Circuit Connections

Load Circuit Control Output Wiring

Instructions for connecting load circuits for contact and solid-state outputs, including delay times.

Reset and Count Input Wiring

Diagrams for connecting reset inputs and count inputs using no-voltage and voltage signal types.

Operation, Power Failure, and Inputs

Voltage Input Details for Counting

Operation, Display, and Power Failure