Omron H8CA-S Series

Mounting style Surface/flush mounting
Operating function Preset counter/timer (selectable)
Operating system (mode) Counter: reversible (Three input modes and four operating modes are selectable)
Timer: time-limit operation, integrating operation (Four operating modes are
selectable.)
Backup power supply for memory protection Provided: Approx. 10 years at 20°C (68°F)
Number of counts 0 to 999999 (6 digits)
Timing ranges 0.00 to 9999.99 s, 0.0 to 99999.9 min, 0.0 to 99999.9 h (6 digits)
External connection Socket
Display type 6-digit backlit LCD; 8mm (0.32 in) Present Value, 4mm (0.16 in) Set Value
Count and reset input for counter function; No-voltage input * Voltage input
reset and gate input for timer function (solid-state/contact input)
Control output Contact Solid-state Contact Solid-state
Power supply/ AC 30 cps H8CA-SAL H8CA-SALS H8CA-SALV H8CA-SALVS
counting speed 1 kcps H8CA-SAH H8CA-SAHS H8CA-SAHV H8CA-SAHVS
DC 30 cps H8CA-SDL H8CA-SDLS H8CA-SDLV H8CA-SDLVS
1 kcps H8CA-SDH H8CA-SDHS H8CA-SDHV H8CA-SDHVS
* Do not use the contact input at a counting speed of 1 kcps.
Solid-State Counter/Timer H8CA-S
1/16 DIN, Easy-to-Operate
Combination Counter and Timer
■ Operation selectable as preset
counter or timer
■ 6-digit LCD display —
Present Value: 8 mm (.32 in)
Set Value: 4 mm (.16 in)
■ Nonsignificant zeros suppressible
from preset or count value display
■ Selectable power supply voltages 24
to 240 V AC and 12 to 120 V DC
■ Memory protection
■ 4 programmable output modes
available for both counter and timer
functions
Ordering Information
■ COUNTER/TIMER
■ ACCESSORIES
Description Part number
Sockets Bottom surface or track mounting, top screw terminals P2CF-11
Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3GA-11
Panel mounting adapter Fits behind panel, ideal for side by side installation (Use P3GA-11 socket) Y92F-30
Mounting track DIN rail, 50 cm (1.64 ft) length PFP-50N
DIN rail, 1 m (3.28 ft) length PFP-100N
End plate PFP-M
Spacer PFP-S
Power supply/
counting speed

Omron H8CA-S Series Specifications

General

Brand	Omron
Model	H8CA-S Series
Category	Cash Counter
Language	English

Summary

Product Overview H8 CA-S

Ordering Information

Details on how to order the H8CA-S counter/timer and accessories.

Specifications

Ratings

Electrical and performance ratings for the H8CA-S unit.

Characteristics

Physical and environmental characteristics of the H8CA-S.

Engineering Data

Electrical Service Life

Graphs showing expected service life based on load current and voltage.

Timing Charts

Visual representation of counter and timer function timing signals.

Count Input Modes

Explanation of different input signal modes for counting operations.

Input Signal Functions

Input Signal Types and Characteristics

Details on no-voltage, voltage, contact, and solid-state inputs.

Counter Input Mode Descriptions

Descriptions of counter modes A, B, and C.

Output Operation Modes

Output Modes for CounterTimer

Explanation of output modes N, F, C, and R for operations.

Dimensions and Mounting Accessories

H8 CA-S Dimensions and Panel Cutout

Physical dimensions and panel cutout specifications for the H8CA-S.

Sockets and Panel Mounting Adapter

Details of available mounting sockets and panel adapters for installation.

Mounting Track and Nomenclature

Mounting Track Specifications

Specifications for DIN rails, end plates, and spacers.

Nomenclature and Key Functions

Identification of unit parts, keys, and their functions.

Programming Guide

Selecting Function Mode

Steps to select counter/timer function, input, and output modes.

Programming Operations

Function and Mode Selection

Detailed steps for selecting counter/timer function, input, and output modes.

Setting Example for Counter

Illustrative example of setting the counter function and modes.

Programming Numeric Values

Selecting Timer Function Mode

Steps to select timer function, time units, and output modes.

Presetting Numeric Values

Guide to entering preset values for the counter/timer operation.

Connections and Wiring

Terminal Arrangements Overview

Diagrams showing terminal connections for counter and timer modes.

Power Supply Connection Details

Instructions for connecting the power supply to the unit.

Connection Cautions and Notices

Important warnings and notices regarding input terminal connections.

Load Circuit and Input Connections

Control Output Wiring

Wiring examples for contact and solid-state output types.

Reset and Count Input Wiring

Diagrams for connecting reset and count inputs for various types.

Operations and Monitoring

Power Failure Detection and Handling

How the H8CA-S detects and indicates power failures.

Operation Status and Display Indicators

Explanation of operational status and display indicators during use.

Mounting Instructions

Surface Mounting Procedures

Instructions for mounting the unit using a surface socket.

Flush Panel Mounting Procedures

Procedure for flush mounting the H8CA-S with an adapter.

Lithium Battery Disposal Caution

Warning regarding the proper disposal of the built-in lithium battery.