15
HOW TO TAKE A MEASUREMENT
Viewing Measurement Results
You can press the UP button to advance to the next measurement
result at any time while the results are automatically displayed.
Press the GUEST/MEMORY button to view the previous
measurement. The M indicator appears on the display. Press the
GUEST/MEMORY again to return to the current measurement results.
5. Turn the monitor off.
Press the Power Switch.
Measuring Weight Only
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb symbol
as illustrated below.
2. Step onto the Measur
ement Platf
orm.
Stand with your weight evenly distributed on the measurement platform.
Remain still and do not mo
v
e until the measurement is complete.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
Your feet
3. Step off the Measur
ement Platf
orm
4. Turn the monitor off.
Press the Po
wer Switch.
NOTE: The monitor will automatically turn off after 5 minutes.
HBF-400-IM 2/20/06 5:50 PM Page 15
To Next Page
Loading...
