26
Maintenance and Cleaning
How to attach the cuff cover
1. Insert the ring marked "UP" from the front as
shown, and pull to the back.
2. Insert the front of the cuff cover into the
groove.
3. Insert the back of the cuff cover into the
groove.
Make sure that the cuff cover rings are completely
inserted into the grooves.
Make sure the seams of the cuff cover are at the right,
left, and top.
Seams
HBP-9020.fm 26 ページ ２０１１年５月２５日 水曜日 午後２時１０分
To Next Page
Loading...
