Omron HBP-1320 User Manual (English)

Other manuals for Omron HBP-1320

Questions and Answers:

S
Sara RodriguezAug 5, 2025
How to fix Omron Blood Pressure Monitor when the power does not turn on?
- C
  Christian MorrisAug 5, 2025
  If your Omron Blood Pressure Monitor isn't turning on, here's what to check: * If using battery power, ensure the battery is correctly installed or replace it with a new one. * Verify the AC adapter is properly connected and not loose, and check if the AC adapter or battery has failed. * If these steps don't work, disconnect the AC adapter and remove the battery, then contact your Omron dealer or distributor, as there may be an internal part failure.
C
Christopher WilsonAug 10, 2025
Why does the cuff not inflate on my Omron HBP-1320 Blood Pressure Monitor?
- A
  Antonio McclainAug 10, 2025
  If the cuff on your Omron Blood Pressure Monitor isn't inflating when you press the start/stop button, check the cuff tube connection to make sure it's not loose. If there's an air leak in the cuff, consider replacing it. Also, if pressure is displayed, ensure the cuff tube isn't bent.
M
Mr. Randall McleanAug 17, 2025
Why does my Omron Blood Pressure Monitor show abnormal measurement value?
- J
  Julia NguyenAug 17, 2025
  If you're getting abnormal readings on your Omron Blood Pressure Monitor, it might be due to several factors. Body movement like chills or trembling, arrhythmia, noise in the cuff, someone touching the patient, or cardiac massage being performed can all affect the accuracy. Check the patient by palpation and then repeat the measurement.
D
Dominique WilliamsAug 23, 2025
What to do if Omron Blood Pressure Monitor runs on battery when plugged in?
- S
  Shirley MartinezAug 25, 2025
  If your Omron Blood Pressure Monitor runs on battery even when plugged in, ensure the AC adapter is correctly connected to the unit and the power outlet. Also, verify the outlet is working by plugging in another device.
M
Michelle CobbAug 29, 2025
Why does my Omron HBP-1320 Blood Pressure Monitor become hot?
- J
  jonesjohnAug 29, 2025
  If your Omron Blood Pressure Monitor becomes hot, ensure nothing is blocking or covering the unit to allow for proper ventilation. If the unit is too hot to touch, immediately turn it off, disconnect the AC adapter, remove the battery, and contact your Omron retail dealer or distributor, as there may be an internal problem.

Omron HBP-1320 Specifications

General

Product Name	Omron HBP-1320
Category	Blood Pressure Monitor
Measurement Method	Oscillometric
Measurement Range (Blood Pressure)	0-299 mmHg
Accuracy (Blood Pressure)	±3 mmHg
Accuracy (Pulse)	±5% of reading
Inflation	Automatic
Deflation	Automatic
Memory	60 readings
Display	LCD
Measurement Range (Pulse)	40 to 180 beats per minute
Power Source	AC Adapter or Batteries

Summary

Introduction

Intended Use and Exemptions

Describes device purpose, users, and OMRON's liability exclusions.

Safety Precautions

Safety Symbols and General Information

Explains safety symbols and provides general usage notes.

Usage Warnings

Storage, Setup, and Environmental Hazards

Details warnings for device storage, setup, and environmental hazards.

Operation Guidelines

Key Warnings for Safe Operation

Crucial warnings for safe operation, including EMC compliance and accessory connections.

Patient and Device Cautions

NIBP Measurement Procedures

NIBP Warnings and Cautions

Warnings and cautions related to cuff usage, patient conditions, and device handling during NIBP measurement.

NIBP Measurement Specific Cautions

Device Components and Features

Product Components and Accessories

Lists the main unit, standard medical accessories, and optional accessories.

Key Product Features

Unit Functions and Controls

Front and Back Unit Overview

Identifies and describes the main buttons and connectors on the front and back of the unit.

Display Information

LCD Display Symbols Explained

Explains the meaning of various icons and symbols displayed on the LCD screen.

Battery Management

Battery Installation, Handling, and Charging

Safety warnings, cautions for battery installation, handling, and charging procedures.

Battery Charging and Status Indicators

Explains battery charging process and level indicators.

AC Adapter Connection

System Settings

Menu Mode Settings

Explains how to configure "Initial Inflation Pressure Value" and "Auscultation Mode" settings.

Utility Mode Settings

Describes how to configure "Auto Power Off" and "Pressure Accuracy Confirmation" settings.

NIBP Measurement Principles

Oscillometric Measurement Method

Explains the oscillometric method used for NIBP measurement, focusing on oscillation detection.

Cuff Management

Cuff Selection and Connection

Provides guidance on selecting the correct cuff size and connecting it to the unit.

Cuff Application Guide

Advises on correct cuff placement and alignment for accurate readings.

Cuff Placement Cautions

Cautions on cuff height, patient position, and potential measurement errors.

Measurement Procedures

Manual and Auscultation Measurement

Step-by-step guides for taking measurements in manual and auscultation modes.

Measurement Functions and Control

Pulse, Movement Detection, and Last Reading

Explains pulse/movement detection, stopping measurement, power off, and viewing last reading.

Maintenance and Cleaning

Inspection, Safety Management, and Cleaning

Outlines inspection, safety management, device cleaning, and cuff care procedures.

Device and Cuff Maintenance

Provides instructions for device cleaning, service notes, and cuff care.

Pre-Use Checks

Power-On and NIBP Setup Checks

Details checks for external appearance, power, buttons, and NIBP setup before and after device activation.

NIBP Setup Verification

Guides on checking the attached cuff, its connection, and initial measurement for NIBP.

Troubleshooting Common Issues

Power, Display, and Temperature Issues

Provides causes and solutions for power, display, and overheating problems.

Battery and Cuff Operation Troubleshooting

Explains causes and solutions for battery and cuff inflation/measurement issues.

Measurement and Cuff Inflation Failures

Lists reasons and solutions for cuff inflation failure and inability to measure.

Addressing Measurement Errors

Resolving Abnormal and Questionable Values

Lists causes and solutions for abnormal and questionable measurement values.

Handling Measurement Inconsistencies

Covers issues where measurement values are questionable due to various factors.

Error Code Reference

System and NIBP Error Code Solutions

Details system and NIBP error codes and their corresponding points to check.

Troubleshooting Other Problems

Specific Error Code Solutions (E3, E40-E42)

Explains causes and solutions for specific error codes like E3, E40, E41, E42.

Disposal and Environmental Information

Technical Specifications

Factory Default Settings and Backup

Shows factory default settings and backup behavior for various configurations.

HBP-1320 Detailed Specifications

Lists technical specifications for the main unit, AC adapter, and rechargeable battery.

Environmental Conditions

Operational and Storage Parameters

Specifies the operating and storage conditions for temperature, humidity, and atmospheric pressure.

NIBP Measurement Specifications

NIBP Technology, Method, and Accuracy

Details NIBP measurement technology, method, range, and accuracy.

Pressure and Pulse Rate Accuracy

Specifies the accuracy for pressure display and pulse rate measurements.

Electromagnetic Compatibility (EMC)

EMC Emission and Immunity Tests

Details the electromagnetic emission and immunity tests performed on the device.

EMC Guidance and RF Equipment Use

Provides guidance on EMC environments and separation distances for RF equipment.

Product Disposal and EMC Precautions

Provides instructions for proper disposal of the product and batteries according to environmental regulations.

Manufacturer's Declarations

EMC Test Specifications for RF Devices

Details test specifications for enclosure port immunity to wireless RF communication devices.

RF Device EMC Compliance Levels

Lists compliance levels for various RF frequencies and communication standards.

RF Communication Device Immunity Guidelines

Specifies test levels and guidance for immunity to RF communication devices.

Important EMC Information and Disposal

Proper Product and Battery Disposal (WEEE)

Provides instructions for proper disposal of the product and batteries according to environmental regulations.

Manufacturer's Declarations (EMC)

EMC Test Specifications for RF Equipment

Details test specifications for enclosure port immunity to wireless RF communication devices.

RF Device Immunity Test Guidelines

Specifies test levels and guidance for immunity to RF communication devices.

RF Device EMC Compliance Details

Lists compliance levels for various RF frequencies and communication standards.

EMC Information and Product Disposal

Product and Battery Disposal Instructions

Provides instructions for proper disposal of the product and batteries according to environmental regulations.

Related product manuals

Omron HBP-1320 User Manual

Table of Contents

Other manuals for Omron HBP-1320

Questions and Answers:

Omron HBP-1320 Specifications

Summary

Introduction

Intended Use and Exemptions

Safety Precautions

Safety Symbols and General Information

Usage Warnings

Storage, Setup, and Environmental Hazards

Operation Guidelines

Key Warnings for Safe Operation

Patient and Device Cautions

NIBP Measurement Procedures

NIBP Warnings and Cautions

NIBP Measurement Specific Cautions

Device Components and Features

Product Components and Accessories

Key Product Features

Unit Functions and Controls

Front and Back Unit Overview

Display Information

LCD Display Symbols Explained

Battery Management

Battery Installation, Handling, and Charging

Battery Charging and Status Indicators

AC Adapter Connection

System Settings

Menu Mode Settings

Utility Mode Settings

NIBP Measurement Principles

Oscillometric Measurement Method

Cuff Management

Cuff Selection and Connection

Cuff Application Guide

Cuff Placement Cautions

Measurement Procedures

Manual and Auscultation Measurement

Measurement Functions and Control

Pulse, Movement Detection, and Last Reading

Maintenance and Cleaning

Inspection, Safety Management, and Cleaning

Device and Cuff Maintenance

Pre-Use Checks

Power-On and NIBP Setup Checks

NIBP Setup Verification

Troubleshooting Common Issues

Power, Display, and Temperature Issues

Battery and Cuff Operation Troubleshooting

Measurement and Cuff Inflation Failures

Addressing Measurement Errors

Resolving Abnormal and Questionable Values

Handling Measurement Inconsistencies

Error Code Reference

System and NIBP Error Code Solutions

Troubleshooting Other Problems

Specific Error Code Solutions (E3, E40-E42)

Disposal and Environmental Information

Technical Specifications

Factory Default Settings and Backup

HBP-1320 Detailed Specifications

Environmental Conditions

Operational and Storage Parameters

NIBP Measurement Specifications

NIBP Technology, Method, and Accuracy

Pressure and Pulse Rate Accuracy

Electromagnetic Compatibility (EMC)

EMC Emission and Immunity Tests

EMC Guidance and RF Equipment Use

Product Disposal and EMC Precautions

Manufacturer's Declarations

EMC Test Specifications for RF Devices

RF Device EMC Compliance Levels

RF Communication Device Immunity Guidelines

Important EMC Information and Disposal

Proper Product and Battery Disposal (WEEE)

Manufacturer's Declarations (EMC)

EMC Test Specifications for RF Equipment