Omron HBP-1320 User Manual (English)

Other manuals for Omron HBP-1320

Questions and Answers:

S
Sara RodriguezAug 5, 2025
How to fix Omron Blood Pressure Monitor when the power does not turn on?
- C
  Christian MorrisAug 5, 2025
  If your Omron Blood Pressure Monitor isn't turning on, here's what to check: * If using battery power, ensure the battery is correctly installed or replace it with a new one. * Verify the AC adapter is properly connected and not loose, and check if the AC adapter or battery has failed. * If these steps don't work, disconnect the AC adapter and remove the battery, then contact your Omron dealer or distributor, as there may be an internal part failure.
C
Christopher WilsonAug 10, 2025
Why does the cuff not inflate on my Omron HBP-1320 Blood Pressure Monitor?
- A
  Antonio McclainAug 10, 2025
  If the cuff on your Omron Blood Pressure Monitor isn't inflating when you press the start/stop button, check the cuff tube connection to make sure it's not loose. If there's an air leak in the cuff, consider replacing it. Also, if pressure is displayed, ensure the cuff tube isn't bent.
M
Mr. Randall McleanAug 17, 2025
Why does my Omron Blood Pressure Monitor show abnormal measurement value?
- J
  Julia NguyenAug 17, 2025
  If you're getting abnormal readings on your Omron Blood Pressure Monitor, it might be due to several factors. Body movement like chills or trembling, arrhythmia, noise in the cuff, someone touching the patient, or cardiac massage being performed can all affect the accuracy. Check the patient by palpation and then repeat the measurement.
D
Dominique WilliamsAug 23, 2025
What to do if Omron Blood Pressure Monitor runs on battery when plugged in?
- S
  Shirley MartinezAug 25, 2025
  If your Omron Blood Pressure Monitor runs on battery even when plugged in, ensure the AC adapter is correctly connected to the unit and the power outlet. Also, verify the outlet is working by plugging in another device.
M
Michelle CobbAug 29, 2025
Why does my Omron HBP-1320 Blood Pressure Monitor become hot?
- J
  jonesjohnAug 29, 2025
  If your Omron Blood Pressure Monitor becomes hot, ensure nothing is blocking or covering the unit to allow for proper ventilation. If the unit is too hot to touch, immediately turn it off, disconnect the AC adapter, remove the battery, and contact your Omron retail dealer or distributor, as there may be an internal problem.

Omron HBP-1320 Specifications

General

Product Name	Omron HBP-1320
Category	Blood Pressure Monitor
Measurement Method	Oscillometric
Measurement Range (Blood Pressure)	0-299 mmHg
Accuracy (Blood Pressure)	±3 mmHg
Accuracy (Pulse)	±5% of reading
Inflation	Automatic
Deflation	Automatic
Memory	60 readings
Display	LCD
Measurement Range (Pulse)	40 to 180 beats per minute
Power Source	AC Adapter or Batteries