30
Specifications
Factory Default Settings
Factory default settings and backup are as shown below.
Backup
: Setting is retained even if the power is interrupted.
: Reverts to factory default setting if the power is turned off.
Technical Specifications: HBP-1320
Main unit
Power supply
Setting Pressure Value Settings Factory Setting Backup
Initial Inflation Pressure Value AUTO, 220, 250, 280 AUTO
Auscultation Mode ON, OFF OFF
Auto Power Off 5 min, 10 min 5 min
Product category Electronic Sphygmomanometers
Product description Automatic Upper Arm Blood Pressure Monitor
Model (code) HBP-1320 (HBP-1320-E)
Measurement Parameter NIBP, PR
Dimension Main unit: 123 x 201 x 99 (mm) 4.84 x 7.91 x 3.90 (inch) (W x H x D)
AC adapter: 46 x 66 x 66.2 (mm) 1.81 x 2.60 x 2.61 (inch) (W x H x D)
Battery: 54 x 43.5 x 15.4 (mm) 2.13 x 1.71 x 0.61 (inch) (W x H x D)
Weight
Main unit: Approx. 0.52 kg (not including accessories and options)
AC adapter: Approx. 114 g
Battery: Approx. 0.1 kg
Display 7 segment LCD
Protection Class
Class II (AC Adapter)
Internal powered equipment (when operating with battery only)
Degree of Protection Type BF (Applied part): Cuff
Operation Mode Continuous operation
MDR Classification Class II a
AC adapter Input voltage range: AC 100 V to 240 V
Frequency: 50/60 Hz
Output voltage range: DC 6 V ±5%
Rated output current: 1.6 A
Rechargeable battery Type: 3.6 V, 1900 mAh
Number of operation cycles when fully charged: 300
Measurement conditions
• New battery fully charged
• Ambient temperature of 23°C (73.4°F)
• Using M-size cuff
• SYS 120 / DIA 80 / PR 60 (Inflation setting: AUTO)
• One 5-minute cycle consisting of “cuff measurement time + wait time”
2829490-0B_IM-HBP-1320-E-03-04-2020.book Page 30 Thursday, April 1, 2021 8:24 AM
To Next Page
Loading...
