19
3.Using the Monitor
Notes:
• Sit still and do not talk or move until the measurement is
completed.
• Keep the monitor at heart level until the measurement is
completed.
• To cancel the measurement, press the START/STOP
button at any time during measurement.
4. After the monitor has detected
your blood pressure and pulse
rate, the buzzer sounds “beep
pip pip pip”. The cuff
automatically deflates and your
blood pressure and pulse rate
are displayed.
Note: The time and date of the
measurement are
displayed alternately.
5. Press the START/STOP button
to turn the monitor off.
If you forget to turn the monitor
off, it will shut itself off
automatically after two minutes.
Alternating
display
HEM-6052-C1_B_M.fm Page 19 Tuesday, March 9, 2010 9:15 AM
To Next Page
Loading...
