Omron HEM-6052 - Preparation; Installing and Replacing Batteries

8
2. Preparation
2.1 Installing/Replacing the Batteries
1. Remove the battery cover
by pulling it off in the
direction of the arrow.
2. Insert two 1.5V “AAA”
alkaline (LR03) batteries in
the battery compartment.
Make sure their polarity (+/–)
is aligned with the polarity
(+/–) as indicated in the
battery compartment.
3. Set the date and time.
Refer to section 2.2.
4. Put the battery cover back
in place.
Note: Make sure that the
battery cover is
securely in position.
HEM-6052-C1_B_M.fm Page 8 Tuesday, March 9, 2010 9:15 AM