Omron HEM-7300 - Page 30

30
4.Handling Errors and Problems
Nothing happens
when you press the
buttons.
The batteries are
empty.
Replace the batteries
with new ones.
The batteries have
been inserted
incorrectly.
Insert the batteries with
the correct (+/ -) polarity.
Other problems.
Press the START/STOP button and repeat
measurement.
If the problem continues, try replacing the
batteries with new ones.
If this still does not solve the problem, contact
your local authorised Omron distributor or dealer.
Problem Cause Remedy
HEM-7300-C3_B_M.fm Page 30 Tuesday, March 9, 2010 10:17 AM