20
Follow the procedure below to delete all the previous measurement
results and settings, including the date, time, weight, height, and stride
length.
1. Press and hold .
“lb” or “kg” ashes on the display.
2. Press and hold and at the same time.
After “Clr” has been displayed, “lb” and “kg” ash on the display.
The measurement results stored in memory and the settings for the
date, time, weight, height and stride length are deleted. To continue
using the unit, reset the date, time, weight, height, and stride length
(refer to “SETTINGS”).
DELETING ALL RESULTS AND SETTINGS
To Next Page
Loading...
