Omron HJ-327T - Changing the Battery Cover

6
CONTENTS BEFORE USING INSTRUCTIONS MAINTENANCEBEFORE USING Contents
CHANGING THE BATTERY COVER
A battery cover with clip is attached to the
tracker at the time of purchase. You can replace
it with the spare battery cover depending on
your needs.
Attach to the tracker Remove from the tracker
1. Align the protrusion
on the battery cover
with the indent on
the tracker.
2. Insert the coin
shaped screwdriver
into the groove of
the battery cover.
3. Rotate the battery
cover clockwise.
1. Insert the coin
shaped screwdriver
into the groove of
the battery cover.
2. Rotate the battery
cover counter-
clockwise.
3. Lift the battery
cover out of the
tracker.