Omron HJ-327T - Tracker Display and Bluetooth; Tracker Display Operations; Bluetooth Functionality

11
MAINTENANCE CONTENTS BEFORE USING INSTRUCTIONS MAINTENANCEMaintenance contents INSTRUCTIONS
4. Vibrations from a moving vehicle
•
You are on a bicycle, automobile, train or bus.
5. Walking extremely slowly
How to turn the tracker’s display on and off
To turn on the tracker’s display:
Shake the tracker 2 or 3 times in any direction to
turn on the display. After shaking the tracker, it
will take a moment for the screen to activate.
To turn off the tracker’s display:
Touch the center of the tracker’s display 2 or
3 seconds to turn off the display. In addition,
the screen will go blank after 20 seconds of
inactivity so as to save battery life. Refer to
“Battery saving mode” for more information.
How to turn off Bluetooth
®
Bluetooth
®
is set “ON” as a default. To turn off
Bluetooth
®
, please remove the tracker’s battery.
Battery saving mode
The tracker contains a battery saving mode. The
screen goes blank after 20 seconds of inactivity.
Even though the display is off, the tracker will
continue tracking all indices.
This feature helps extend the battery life of the
tracker.