What to do if the Omron HJ-327T GPS display is unusual?
If your Omron GPS display is unusual or unresponsive, it might be due to a low or exhausted battery. Replace it with a new 3V CR2032 lithium battery. Alternatively, a data communication error could be the cause; try transferring the data again.
What to do if data cannot be transferred from Omron HJ-327T?
If data cannot be transferred from your Omron GPS, ensure the tracker is close to your smartphone without any obstructions. If the issue persists, the data communication with your smartphone may be abnormal. Try turning your smartphone off and on, then attempt the data transfer again.
Why can't I transfer data from my Omron GPS?
If data cannot be transferred from your Omron GPS, it could be due to several reasons. First, check if battery saving mode is active. Second, ensure the app is installed and running on your smartphone. Third, verify that the tracker is registered to the app. Fourth, try transferring the data in a location free from radio waves. Finally, check if the battery is low or exhausted and replace it if necessary with a new 3V CR2032 lithium battery.
To Next Page
General