13
6. Press the SET button to change the date.
Press the MODE button.
Day blinking
7. Press the SET button to change the day. Press the MODE
button to exit the setting mode. The date and time is set.
NOTE: If the time has been set to the 12-hour AM/PM clock,
“AM” is not displayed for times before noon, but
“PM” is displayed for times after noon.
SETTING THE TIME AND DATE
1. Press the MODE button to select the Time of Day
operating mode.
2. Press the SET button to display the date.
3. Press the MODE button to return to the Time of Day.
NOTE: If no button is pressed the monitor will return to
the Time of Day after 10 seconds.Press any key.
DISPLAYING THE DATE
To Next Page
Loading...
