Omron HV-F013 - Step 2 - Attach Electrode Cord to the Main Unit; Step 3 - Snap Either Electrode Cord to each of the Pads

14
ASSEMBLY STEPS
STEP 2 – ATTACH ELECTRODE CORD
TO THE MAIN UNIT
Attach the electrode cord plug to the bottom of the main unit.
STEP 3 – SNAP EITHER ELECTRODE CORD TO
EACH OF THE PADS
For the  rst time, take the pads out of the sealed package.
Do NOT turn unit on,
until pads are on your
skin.
You MUST USE BOTH
PADS or stimulation will
not work.
NOTE:
Pads will not stick if the skin has too much hair. We recommend
shaving the area for effective treatment.