23
GET STARTED WITH YOUR THERAPY
STEP 3 – SELECT INTENSITY LEVEL
(1 LOW – 10 HIGH)
The unit automatically starts at the intensity level of 1. Slowly
increase the intensity level by pressing ▲(Up) button. You should
feel a gentle pulsing sensation.
How do I select the right intensity level for my pain?
Each time you press ▲(Up) or ▼(Down) button, it moves to
another level. If the stimulation sensation becomes weaker or
disappears, increase the intensity. But, if the sensation is at all
uncomfortable, press ▼(Down) button to decrease the intensity.
• Press ▲ for higher intensity.
• Press ▼ for lower intensity.
If Pad Light is blinking, the unit will automatically turn off after
30 seconds. (
“TROUBLE SHOOTING” on page 28)
What intensity level is my unit on?
Press ▲(Up)/▼(Down) button to increase/decrease the intensity.
The Intensity Light moves up/down after pressing it once or twice
(as shown below). Therefore, the light may not move up/down, but
the intensity level does increase/decrease each time you press it.
ntensity Light:
ntensity level 1 or 2 3 or 4 5 or 6 7 or 8 9 or 10：
How long is the therapy?
The unit will continue automatically for 15 minutes before it shuts off.
If you want to stop the therapy while in use, press the Power button. We
recommend a total of 30 minutes therapy in one sitting, up to 3 times/day.
To Next Page
Loading...
Need help?
General
