10
How to Connect the Electrode Cord
Place the Pad on a flat surface and securely connect the Electrode Cord Plug
with the Pad.
❇ Although Electrode Cord Plugs are provided in red and white, either plug can
be connected with one of the Pads irrespective of color.
General advice from OMRON on the handling of Electrode Cord
• Avoid excessive bending and pulling of the Electrode Cord.
• Hold the Electrode Cord Plug when unplugging the Electrode Cord from the Main Unit.
• If the Electrode Cord is torn or in trouble, please contact the store where you purchased the unit or at the
nearest OMRON dealer.
1. Turn the Intensity Adjustment/Power Dial Switch to
the “OFF” position.
2. Connect the Electrode Cord with the Main Unit.
Insert the Electrode Cord Plug into the Electrode Cord Jack.
3. Connect the Electrode Cord to the Pad.
When using the unit for the first time
Take out the Pads from the clear plastic bag.
❇ Do not peel off the clear film attached to the Pad at this time.
To Next Page
Loading...
Need help?
General
