How to use the Special Mode
You can use this Mode when you want to
adjust the stimulation to your favourite
programme.
You can use this Mode in combination with all
Automatic Courses.
❇ The Button you have selected will be
flashing.
❇ When you want to stop the function you
selected, push the Button again.
If you want to increase intensity of
stimulation;
Use the Hyper Mode.
HYPER
The unit provides gradual increase of intensity
during treatment.
❇ When you keep on pressing the Hyper Button for
several seconds, the unit will start operation in
Hyper Mode.
❇ Since intensive stimulation is applied in this Mode, please
be careful not to switch to this Mode suddenly.
❇ In this Mode, the batteries will wear out faster than in
other Modes.
If you do not like the feel of irritation:
Use the Soft Mode.
SOFT
The unit provides soft stimulations
without giving the feel of irritation.
INTENSITY
/POWER
REGION
TAP
SHLDR
WAIST
JOINT LEG
ARM SOLE
KNEAD
PUSH RUB
MASSAGE
OFF
POINT
WIDE
RELIEVE
SOOTHE
REGION
SHLDR
WAIST
JOINT LEG
ARM SOLE
2. Select the region to which the Pads are attached.
For example, if you attach the Pads to your shoulders, select
Shoulder. The unit treats you with the program for Shoulder.
❇ The Button you have selected will be flashing.
1. Push the Region Button.
Each time you push the Region Button, the display flashes in the order
of Shoulder, Joint, Arm, Sole, Leg (calf), and Waist (lower back).
❇ When you use the unit for the first time, the Shoulder light will flash
and WIDE will be displayed. When you use the unit for the second
time and after, the Button you used in the previous treatment will
flash (except for the Hyper Mode.)
17
How to Treat
Treat the region with the
Button
When you want to treat the selected region of shoulder, joint, arm, sole, leg (calf) and waist (lower back)
to which the Pads are attached with the program
When Shoulder is selected
Treat the region by selecting one course from Soothe, Relieve, Region, and Massage.
▼
▼
To Next Page
Loading...
Need help?
General
