13
2. Preparation
EN
4. Repeat steps 2 and 3 to set the
month.
The month is set and the day digits
flash on the display.
5. Repeat steps 2 and 3 to set the
day.
The day is set and the hour digits
flash on the display.
6. Repeat steps 2 and 3 to set the
hour.
The hour is set and the minutes
digits flash on the display.
7. Repeat steps 2 and 3 to set the
minutes.
The minutes settings is set.
The unit automatically turns itself
off after the minute setting has
been set.
To adjust the date and time, press
and hold the SET button while the
unit is turned off.
To Next Page
Loading...
Need help?
General
