39
4. Quick Reference Guide
EN
4. Quick Reference Guide
This Quick Reference Guide is for reference only. Please read
the entire manual before using the unit for the first time.
To help ensure a reliable reading, avoid eating, smoking, or
exercising for at least 30 minutes before taking a measurement.
Note: Remove any tight-fitting clothing from your upper arm.
1. Sit on a chair with your feet flat on the floor and place your arm
on a table so that the arm cuff will be at the same level as your
heart.
2. Secure the cuff around your arm using the fabric fastener strip.
3. Select your user ID (A or B).
4. Press the O/I START button.
When measurement is complete, the
unit displays your blood pressure and
pulse rate, and automatically deflates
the cuff.
Notes:
• Always wait at least 2-3 minutes before taking another blood
pressure measurement.
• Please note that all measurement results are stored in the
memory. If different people take measurements using the
same device, make sure that you are aware of this fact.
Care and maintenance
To Next Page
Loading...
Need help?
General
