Omron i-C10 - Page 33

33
3. Using the Unit
EN
3. Press the MEMORY button ( ) to display the most recent
set of individual measurement values on the screen. The
values are displayed from the most recent to the oldest.
Note: The date and time are
alternately displayed with the
measurement values.
Press the MEMORY button ( ) to display the next set of
values.
Press and hold the MEMORY button ( ) to display the
values faster.
Auto mode
The average for the consecutive measurements appears on
the display with the auto mode symbol ( ). To display the
values for the individual measurements press the SET button
while the average is displayed.
4. Press the O/I START button to turn the unit off.
Alternating display