What to do if any other problem occurs with Omron JPN616T?
Press the [START/STOP] button to turn the monitor off, then press it again to take a measurement. If the problem continues, remove all batteries and wait for 30 seconds. Then re-install batteries. If the problem still persists, contact your local OMRON representative.
What to do if any other communication issue occurs with the Omron Blood Pressure Monitor?
Follow the instructions shown in the smart device, or visit the “Help” section in the “OMRON connect" app for further help. If the problem still persists, contact your local OMRON representative.
Provides important information for safe and proper use of the monitor.
Indicates potentially hazardous situations that could result in death or serious injury.
Indicates potentially hazardous situations that could result in minor/moderate injury or equipment damage.
Provides general guidelines for safe and accurate blood pressure measurement.
Information on accuracy testing, calibration, and recommended service intervals.
General| Model | JPN616T |
|---|---|
| Type | Upper Arm Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Display | LCD |
| Technology | IntelliSense |
| Cuff Size | 22-42 cm |
| Memory | 60 readings |
| Irregular Heartbeat Detection | Yes |
| Body Movement Detection | Yes |
| Hypertension Indicator | Yes |
| Average Reading Function | Yes |
| Measurement Range (Pressure) | 0-299 mmHg |
| Power Source | 4 x AA batteries |
| Measurement Range (Pulse Rate) | 40-180 beats/min. |
To Next Page
