Why is my Omron M1 Eco reading too low or too high?
If your Omron Blood Pressure Monitor gives readings that are either extremely low or high, several factors could be at play. First, ensure the arm cuff is applied correctly, without any clothing interfering with it. Also, it's crucial to remain still and avoid talking during the measurement process. Correct these common issues to get more accurate readings.
What to do if nothing happens when I press the buttons on my Omron M1 Eco Blood Pressure Monitor?
If your Omron Blood Pressure Monitor isn't responding when you press the buttons, the batteries are likely the problem. Either they're empty and need replacing, or they've been inserted incorrectly. Ensure the batteries are fresh and properly aligned with the correct polarity (+/-).
How to fix an Omron M1 Eco Blood Pressure Monitor when the arm cuff deflates too soon?
If the arm cuff on your Omron Blood Pressure Monitor deflates too soon, it's likely because the cuff is not applied tightly enough. Make sure the cuff is firmly wrapped around your arm for an accurate reading.
Why can't I measure or why are the readings too low or too high on my Omron M1 Eco Blood Pressure Monitor?
If you cannot get a measurement or the readings from your Omron Blood Pressure Monitor are consistently too low or high, make sure the arm cuff is inflated sufficiently, ideally 30 to 40 mmHg above your previous reading. Also, be careful not to accidentally press the air release button during inflation, as this can affect the measurement.
What to do if the arm cuff pressure does not rise on my Omron M1 Eco Blood Pressure Monitor?
If your Omron Blood Pressure Monitor's arm cuff pressure isn't rising, start by checking if the air tube is securely connected to the main unit. If it is properly connected, the issue might be a leak in the arm cuff. In this case, you should replace the arm cuff with a new one.
Why does my Omron M1 Eco lose power during measurement?
If your Omron Blood Pressure Monitor loses power during measurement, the most likely cause is that the batteries are empty. Replace them with new ones to resolve this issue.
General| Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Measurement Range (Pressure) | 0 - 299 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Cuff Size | 22 - 32 cm |
| Inflation | Automatic |
| Deflation | Automatic |
| Display | LCD |
| Power Source | 4 x AA batteries |
| Weight | approx. 300 g (without batteries) |
| Measurement Range (Pulse) | 40 - 180 bpm |
| Accuracy (Pulse) | ±5% |
Provides step-by-step instructions on how to install or replace the batteries in the device.
Explains the correct posture and environment for taking a blood pressure measurement.
Guides users on how to correctly wrap the arm cuff around their arm for accurate readings.
Step-by-step instructions on how to perform a blood pressure measurement using the device.
Lists common error displays, their causes, and recommended solutions for troubleshooting.
Provides a table of common problems, their potential causes, and corresponding remedies.
To Next Page
