What to do if my Omron Blood Pressure Monitor won't turn on?
If nothing happens when you press the buttons on your Omron Blood Pressure Monitor, the batteries may be empty. Try replacing them with new ones. If that doesn't work, make sure the batteries are inserted correctly, paying attention to the (+/-) polarity.
Why is the arm cuff on my Omron Blood Pressure Monitor not inflating?
If the arm cuff pressure isn't rising on your Omron Blood Pressure Monitor, check that the air jack is securely inserted into the main unit. If it is, the arm cuff might be leaking air, and you may need to replace it with a new one.
Why is my Omron M2 Eco reading too high or low?
If your Omron Blood Pressure Monitor shows an extremely low or high reading, it could be due to a few reasons. First, make sure the arm cuff is applied correctly and that no clothing is interfering with it. Also, remain still and avoid talking during the measurement, as movement can affect the reading.
Why does my Omron M2 Eco turn off during measurement?
If your Omron Blood Pressure Monitor loses power during measurement, the batteries are likely empty. Replace them with new ones to resolve this issue.
How to fix incorrect readings on Omron Blood Pressure Monitor?
If you cannot get a measurement or the readings are consistently too low or too high on your Omron Blood Pressure Monitor, make sure the arm cuff has been inflated sufficiently. Inflate the cuff so that it is 30 to 40 mmHg above your previous measurement result.
What to do if the arm cuff on my Omron M2 Eco deflates quickly?
If the arm cuff on your Omron Blood Pressure Monitor deflates too soon, it may be too loose. Apply the cuff correctly, ensuring it is firmly wrapped around your arm.
How to troubleshoot other issues with my Omron M2 Eco Blood Pressure Monitor?
If you are experiencing other problems with your Omron Blood Pressure Monitor, press the O/I START button and repeat the measurement. If the problem continues, try replacing the batteries with new ones.
Step-by-step instructions for correctly inserting and changing batteries.
Guide to setting the correct date and time for accurate measurements and memory function.
Details on correct sitting posture and arm positioning for accurate readings.
Instructions on how to correctly wrap the arm cuff around the upper arm.
Steps to take a reading, including common causes of inaccurate results.
Identifies common error displays, their causes, and recommended solutions.
A guide to common issues and their remedies, such as low readings or no power.
General| Device Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Measurement Range (Pressure) | 0 - 299 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% of reading |
| Inflation | Automatic |
| Deflation | Automatic |
| Cuff Size | 22-32 cm |
| Power Source | 4 x AA Batteries |
| Measurement Range (Pulse) | 40 to 180 beats per minute |
To Next Page
