To Next PageTo Next PageWhy does my Omron Blood Pressure Monitor lose power during measurement?
If your Omron Blood Pressure Monitor unit loses power during measurement, it is likely that the batteries are empty. Replace them with new ones to resolve this issue.
What to do if nothing happens when I press the buttons on my Omron M2 Compact Blood Pressure Monitor?
If nothing happens when you press the buttons on your Omron Blood Pressure Monitor, the batteries may be empty or inserted incorrectly. Try replacing the batteries with new ones or ensure they are inserted with the correct (+/ -) polarity.
Why is the reading extremely low (or high) on my Omron M2 Compact?
An extremely low or high reading on your Omron Blood Pressure Monitor may be due to several factors: the arm cuff not being applied correctly, movement or talking during measurement, or clothing interfering with the arm cuff. Make sure to apply the arm cuff correctly, remain still and do not talk during measurement, and remove any clothing interfering with the arm cuff.
Why doesn't the arm cuff pressure rise on my Omron Blood Pressure Monitor?
If the arm cuff pressure does not rise on your Omron Blood Pressure Monitor, ensure that the air plug is securely inserted into the main unit. Also, check if air is leaking from the arm cuff; if it is, replace the arm cuff with a new one.
Why does the arm cuff deflate too soon on my Omron Blood Pressure Monitor?
If your Omron Blood Pressure Monitor arm cuff deflates too soon, it could be because the arm cuff is loose. Apply the cuff correctly so that it is firmly wrapped around your arm.
What to do if I cannot measure or readings are too low or too high on my Omron Blood Pressure Monitor?
If you cannot measure or the readings are too low or too high on your Omron Blood Pressure Monitor, ensure that the arm cuff has been inflated sufficiently. Inflate the cuff so that it is 30 to 40 mmHg above your previous measurement result.
What to do for other problems with Omron M2 Compact?
Press the O/I START button and repeat measurement. If the problem continues, try replacing the batteries with new ones. If this still does not solve the problem, contact your OMRON retail outlet or distributor.
General| Device Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Measurement Range (Pressure) | 0 - 299 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% of reading |
| Cuff Size | 22-32 cm |
| Power Source | 4 x AA batteries |
| Technology | IntelliSense |
| Display | LCD |
| Weight | 250 g (without batteries) |
| Type | Automatic |
| Measurement Range (Pulse) | 40 to 180 beats per minute |
Step-by-step guide on how to install or replace batteries in the unit.
Instructions on proper posture and environment for accurate blood pressure measurement.
Detailed instructions on how to correctly wrap and position the arm cuff.
Step-by-step guide on how to perform a blood pressure measurement.
Explains interpretation of results outside standard ranges and irregular heartbeat indicators.
Lists error codes, their causes, and recommended solutions for the monitor.
Provides solutions for common problems encountered during unit operation.
